Imitation of printing ink in the ink jet printer applications - ink jet printer - printing special

Heating device came more than two years, because of his auxiliary heating function + pigment Ink , Greatly expanding the media processing power, so that a broader range of graphic production, many people use this (with the modified heating printer) to specifically create business cards (I myself, my 4 printers all installed several Indian to the heater), and some are used as color printing. So I think that the heater in the graphic production played an important role. But in the real experiment there have been some issues, such as etching of the problem not easy to control the printer, not easy to dry and easy to fade, speed slow, not strong adhesion of the ink, some paper, ink and other printing scattered. So now there is no better way to solve these problems? The answer is yes.

Imitation printing ink is ink light weak solution, then many people are worried that the ink is corrosive, so he discouraged.

Yes, since it is soluble ink, then corrosion is inevitable, but the ink is not very high PH value, partial weak base, and some taste. In fact, we do not rule out using ordinary ink nozzles on the machine damage, if not the quality of ink is good, as there will be damage to the nozzle, I had to use a company's pigment ink the nozzle to the whole bad. The question then is how to see the problem, if we get good returns in time to sacrifice some things are still possible.

Then the ink in the end how to use it? Here I recommend to use the old machine with the ink of a friend, Why? Because the old machine even worse, our loss will not be great, but our performance and use of ink is not very familiar with.

Use the ink tube and before the need to clean the ink nozzle, which is necessary because the ink does not dissolve in water, and water will reflect the effect, resulting in precipitation, it sure is to plug in and met the other ink also the same, but soluble in alcohol (ethanol purity: 95%).

Prepare things: empty cartridges, syringes, anhydrous alcohol, even for (preferably dedicated). Installation steps: install over the ink cartridges, ink cartridge with a syringe to inject alcohol, and then use the syringe into the waste ink tube to collect waste ink tube, repeatedly, until flow out until the alcohol is white. Reload for a new link, to inject new ink on it.

Use: in the course of the summer high temperature, the ink likely to be volatile, so do not have the time, can cover. When used to open.

Print: So based on their experience to use for a long time, the ink used properly, return to us is great, such as talking to coated paper, dries quickly, and scratch, do not need high temperature (30 degrees so, just do not open the case of temperature effects are or can be printed), the solution of the pigment + heating problems encountered. There is some special printing media, such as cardboard, gold and silver paper, synthetic paper, printing is very good!

We are high quality suppliers, our products such as Marble texture , china Tile texture for oversee buyer. To know more, please visits decorative wall panel.

Article Source: http://ink.ezinemark.com/imitation-of-printing-ink-in-the-ink-jet-printer-applications-ink-jet-printer-printing-special-3b3c070accd.html